Sepax kits are integral to our Sepax Cell Separation System. They are supplied sterile for single-use and enable a functionally-closed environment to separate cellular product into its components.
The CS-470.1 kit is designed for processing various cellular products, especially bone marrow, in order to obtain the nucleated cell fraction with a high cell concentration into the final product collection vial.
|1||Separation Chamber||220 mL spinning chamber enabling the centrifugation and transfer of processed product|
|0.2 µm filter that connects to the Sepax pressure sensor|
|3||Stopcock||One automatically controlled rotational valve to direct fluid flow|
|4||Drip Chamber||200 μm filter to block blood clots and trap air bubbles|
|5||Initial Line||Connects the kit to the initial bag via a spike or SCD connection|
|6||Collection Vial||Vial to collect the final product. Includes a luer port and microbial filter. **Note** this is not a cryovial|
Kit / protocol compatibility matrix
|Kit / protocol||ReadyCell||SmartRedux||PeriCell||Dilution|
Environmental conditions and compliance
Store kits in a clean and dry environment without chemical or biological contamination within the following conditions:
|Mode||In operation||Storage and transport|
|Temperature||+7 to +27°C||+4 to +40°C|
|Relative humidity||30 to 75%, non-condensing||20 to 75%, non-condensing|
Shelf life: Two years from the date of manufacture.
Sterilization: Ethylene oxide.
Material: Standard medical grade PVC, PP, and other materials.
Biocompatibility: ISO 10993-1
Fluid path: Non-pyrogenic
The CS-470.1 is CE marked and complies with the applicable requirements of the 93/42/EEC Medical Device Directive. Confirm with your local regulatory authority for compliance with other regulations.
CS-470.1: Product #10005
Packaging: Individual blisters sealed with a Tyvek® cover.
Minimum order: Box of 12 kits (dimensions: 57 x 37 x 25 cm, 22.4 x 14.5 x 9.8”).