CS-900.2
Sepax kits are integral to our Sepax Cell Separation System. They are supplied sterile for single-use and enable a functionally-closed environment to separate cellular product into its components.
The CS-900.2 kit is designed for isolating multiple cellular products’ components (bone marrow, peripheral blood stem cells, cord blood). A dedicated line allows for small final volume recovery.
Components
| # | Name | Description |
| 1 | A-200/F Separation Chamber |
220 mL spinning chamber enabling the centrifugation and transfer of processed product |
| 2 | Line Pressure Monitor |
0.2 µm filter that connects to the Sepax pressure sensor |
| 3 | Stopcock Manifold |
Three automatically controlled rotational valves to direct fluid flow |
| 4 | Initial Line | Connects the kit to the initial bag; includes a drip chamber (without filter) |
| 5, 6 | Washing / Resuspension Solution Line | Connects the kit to the washing / resuspension solution |
| 7 | By-product Bag | 1000 mL PVC by-product bag to collect waste |
| 8 | DGM Filter | If applicable, a 0,2µm hydrophilic filter for injecting density gradient medium |
| 9 | Final Bag | 500 mL bag for intermediate and final product |
| 10 | Final Line | Connects the syringe for final product in case of small final volume. Equipped with luer port and clamp. |
Accessory for small final volume option
The separation chamber holder is used for the final steps when the small final volume option applies.
Kit / protocol compatibility matrix
| Kit / protocol | CordWash | SmartWash | CultureWash | NeatCell | Dilution | Adipose |
| CS-600.1 | x | x | x | – | x | – |
| CS-900.2 | – | – | x | x | x | x |
Environmental conditions and compliance
Store kits in a clean and dry environment without chemical or biological contamination within the following conditions:
| Mode | In operation | Storage and transport |
| Temperature | +7 to +27°C | +4 to +40°C |
| Relative humidity | 30 to 75%, non-condensing | 20 to 75%, non-condensing |
Shelf life: Two years from the date of manufacture.
Sterilization: Ethylene oxide.
Material: Standard medical grade PVC, PP, and other materials.
Biocompatibility: ISO 10993-1
Fluid path: Non-pyrogenic
The CS-900.2 is CE marked and complies with the applicable requirements of the 93/42/EEC Medical Device Directive. Confirm with your local regulatory authority for compliance with other regulations.
Ordering information
CS-900.2: Product #10008
Separation chamber holder: Product #6033
Packaging: Individual blisters sealed with a Tyvek® cover.
Minimum order: Box of six kits (dimensions: 33 x 35 x 26 cm, 13 x 14 x 10 in. ).